TESTING AND ADJUSTING MEASURING POWER TRAIN OIL PRESSURE 1. Measuring torque converter outlet pressure (OUT) 1) Connect hydraulic tester F2 to oil pressure pick-up nipple (1). a Use an oil pressure gauge of 0.98MPa {10kg/cm 2 }. 2. Measuring transmission main relief pressure (TM) 1) Connect oil pressure gauge [1] of hydraulic tester F1 to oil pressure pick-up nipple (2). a Use an oil pressure gauge of 5.9MPa {60kg/cm 2 }. 2) Start the engine and set the PCCS lever in the full neutral position. 2) Run the engine and set the PCCS lever in the full neutral position. 3) Measure the oil pressure while the engine is running at low idling and high idling.
3) Measure the oil pressure while the engine is running at low idling and high idling. 4) After finishing measurement, remove the measuring instrument and return the removed parts. 4) After finishing measurement, remove the measuring instrument and return the removed parts. D85EX-15 20-129 (1)