TESTING AND ADJUSTING MEASURING POWER TRAIN OIL PRESSURE 7. Measuring transmission 2nd clutch pressure (2ND) 1) Connect oil pressure gauge [1] of hydraulic tester F1 to oil pressure pick-up nipple (7). a Use an oil pressure gauge of 5.9MPa {60kg/cm 2 }. 8. Measuring transmission 3rd clutch pressure (3RD) 1) Connect oil pressure gauge [1] of hydraulic tester F1 to oil pressure pick-up nipple (8). a Use an oil pressure gauge of 5.9MPa {60kg/cm 2 }. 2) Run the engine and set the parking brake lever in the FREE position. 2) Run the engine and set the parking brake lever in the FREE position. 3) Press the brake pedal and set the PCCS lever in the FORWARD and 2nd gear speed position.
3) Press the brake pedal and set the PCCS lever in the FORWARD and 3rd gear speed position. 4) Measure the oil pressure while the engine is running at low idling. 4) Measure the oil pressure while the engine is running at low idling. Since the torque converter will be stalled, keep pressing the brake pedal securely. Do not raise the engine speed to high idling during measurement. a For the oil pressure gauge, see BPD11546. Since the torque converter will be stalled, keep pressing the brake pedal securely. Do not raise the engine speed to high idling during measurement. a For the oil pressure gauge, see BPD11546.
5) After finishing measurement, remove the measuring instrument and return the removed parts. 5) After finishing measurement, remove the measuring instrument and return the removed parts. 20-132 D85EX-15 (1)