Komatsu — MEASURING PPC VALVE OUTPUT PRESSURE

TESTING AND ADJUSTING MEASURING PPC VALVE OUTPUT PRESSURE MEASURING PPC VALVE OUTPUT PRESSURE 3. Install nipple [1] of hydraulic tester K1 and con- nect oil pressure gauge [2]. a Measuring instruments for PPC valve output pressure Stop the machine on a level place, lower the work equipment to the ground, and set the parking brake lever and safety lock lever in the LOCK position. a Before measuring the PPC valve output pres- sure, check that the control circuit main pressure is normal. a Measure the PPC valve output pressure under the following condition. Hydraulic oil temperature: Within operating range 4. Start the engine and set the safety lock lever in the FREE position. 5.

Run the engine at high idling and operate the control lever of the circuit to be measured and measure the oil pressure. a Measure the oil pressure with the lever at a stroke end. a When measuring the blade circuit, operate the lever until the blade floats. 1. Remove the main control valve cover. 2. Disconnect PPC valve output pressure hose (1) and install oil pressure pickup adapters ( K2 and K3 ). a For the circuits to be measured, see the drawing on the next page. 6. After finishing measurement, remove the mea- suring instrument and return the removed parts. 20-148 D85EX-15 (1) Symbol Part No.

Name K 1 799-101-5002 Hydraulic tester 790-261-1203 Digital hydraulic tester 2 799-401-3100 Oil pressure pickup adapter (Size 02) 02896-11008 O-ring 3 799-401-3200 Oil pressure pickup adapter (Size 03) 02896-11009 O-ring