TESTING AND ADJUSTING MEASURING FAN PUMP CIRCUIT PRESSURE MEASURING FAN PUMP CIR- CUIT PRESSURE 4. Run the engine and set the monitor panel in the adjustment mode. a For the method of operation in the adjust- ment mode, see "Special functions of moni- tor panel (EMMS)". a Adjustment code: 1005 (Fan 100% speed mode) a Measuring instruments for fan pump circuit pres- sure 5. Run the engine at high idling and measure the fan circuit pressure. 1. Open the radiator mask. 2. Disconnect fan motor drive circuit hose (1), install oil pressure pickup adapter P2, and con- nect hose (1) again. 3. Install nipple [1] of hydraulic tester P1 and con- nect oil pressure gauge [2].
a Use an oil pressure gauge which can mea- sure 39.2 MPa {400 kg/cm 2 }. 6. After finishing measurement, remove the mea- suring instruments and return the removed parts. 20-156 D85EX-15 (1) Symbol Part No. Name P 1 799-101-5002 Hydraulic tester 790-261-1203 Digital hydraulic tester 2 799-401-3300 Oil pressure pickup adapter (Size: 04) 02896-11012 O-ring