TESTING AND ADJUSTING SPECIAL FUNCTIONS OF MONITOR PANEL (EMMS) 7. Mechanical system error code display mode (7-MACHINE ERROR CODE MODE) In this mode, you can check the mechanical sys- tem error codes. 1) Selecting and executing mode i) Select “Mechanical system error code display mode” on the mode selection screen. a If the mode is selected, code (bE) is displayed on gear speed display sec- tion (1) and the title is displayed on multi-information section (2). ii) Display the error code display screen by operating buzzer cancel switch (4). [ ]: Execute mode.
2) Display in the case where no codes are recorded If no error codes have been output up to now, the information section displays as shown at right. 3) Display in the case where 1 or more codes are recorded If any error code has been output up to now, the information section displays as shown at right. : No. : Error code (Code being output currently is flashing) : Number of past occurrences : Time measured by service meter after first occurrence : Time measured by service meter after last occurrence a The items shown at right are examples. a For the error codes list, see TROUBLE- SHOOTING. 20-176 D85EX-15 (1)