TESTING AND ADJUSTING SPECIAL FUNCTIONS OF MONITOR PANEL (EMMS) 3) Contents of display on adjustment screen : Code : Adjustment item : Related information a For the detailed information and adjust- ment procedure, see “ADJUSTMENT MODE TABLE AND ADJUSTMENT PROCEDURE”. a If an incorrect code is input, the adjust- ment code input screen appears again after the screen shown at right. In this case, execute the above operation again. 4) When operating machine in adjustment mode If the parking brake lever is set in the FREE position, gear speed display section (1) dis- plays normally and the machine can be oper- ated normally.
a To select another screen, return the park- ing brake lever to the LOCK position and perform the necessary procedure. 5) Changing adjustment item (Limited function) Once the adjustment items are selected, they can be selected with the information switch without inputting the codes again. [ > ]: Next code [ a This function is limited to the numbers marked with a in the "ADJUSTMENT ITEMS TABLE". a This operation is not accepted while the parking brake lever is in the FREE posi- tion. Take care. a An adjustment item can be selected by returning to the input screen and input- ting the code for that item. D85EX-15 20-179 (1)