TESTING AND ADJUSTING SPECIAL FUNCTIONS OF MONITOR PANEL (EMMS) a If the input code is not correct, the code input screen appears again after the screen shown at right. 3) Contents of display on monitoring screen (Right figure shows examples) : Code : Monitoring item : Information : Unit (Not displayed for some items) a For the details, see the “MONITORING MODE TABLE”. 4) Function of holding monitoring information If an information item such as the engine speed is not stabilized and cannot be read easily in the monitoring mode, it can be held and released by operating buzzer cancel switch (4). [ ]: Hold and release.
a While the monitored item is held, the let- ter “H” is displayed at the left end of the lower line. 5) When operating machine in monitoring mode If the parking brake lever is set in the FREE position, gear speed display section displays normally and the machine can be operated normally. a To select another screen, return the park- ing brake lever to the FREE position and perform the necessary procedure. 20-192 D85EX-15 (1)