TROUBLESHOOTING TROUBLE CODE TABLE Related circuit diagram This is the excerpted circuit diagram related to trouble Connector No.: Indicates (Model-No. of pins) (Color). Arrow ( ): Roughly indicates mounting place on machine. TROUBLE CODE TABLE a Regarding trouble code provided with instruction “Refer to table”, check it against table below. 20-406 D85EX-15 (1) Trouble code Contents of trouble Trouble code Contents of trouble KA Disconnection in wiring L0 Fill signals at two or more channels which are not set as combination are turned ON at the same time. KB Short circuit L1 Fill signal is ON when command current to ECMV is OFF.
KK Source voltage reduction/ input L2 Fuel pressure is above maxim specified value. KQ Type select signal inconsis- tency L3 Object part is uncontrollable. KR Defective communication L4 ON and OFF signals at two systems are inconsistent. KT Abnormality in controller L6 Engine rotation signal, terminal C signal, oil pressure switch sig- nal, water temperature sensor signal, etc. are inconsistent with operation state or stop state. KX Outside input signal range L8 Analog signals in two systems are inconsistent. KZ Disconnection or short cir- cuit LC rpm signals in two systems are inconsistent. MA Malfunction LD Switch is pressed for usually unthinkable long time.
MB Performance reduction LH Fill signal is OFF when command current to ECMV is ON. MW Sliding NS Overheat ZG Oil pressure reduction ZK Coolant level reduction