TROUBLESHOOTING ERROR CODE A000N1 ERROR CODE A000N1 (ENGINE: OVERRUN (N1)) 20-418 D85EX-15 (1) Action code Error code Controller code Trouble Engine: Overrun (N1) (Engine controller system) — A000N1 ENG Contents of trouble • The engine speed exceeded the specified speed. Action of controller • Saves the trouble but does not make any alarm. • Stops fuel injection until the engine speed lowers below the specified speed. Problem that appears on machine • None in particular. Related information • Method of reproducing error code: Turn starting switch ON. • Engine speed can be checked in monitoring mode (Monitoring mode: 01000).
Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 If any other error code is displayed and recorded at the same time, carry out troubleshooting for that error code first. 2 Improper use Instruct the using procedure again. 3 Defective engine controller Check that engine speed is displayed normally.