TROUBLESHOOTING ERROR CODE AD11KA ERROR CODE AD11KA (FUEL SUPPLY PUMP SOLENOID 1: DISCONNECTION IN WIRING (KA)) Circuit diagram related to fuel supply pump solenoid 1 20-424 D85EX-15 (1) Action code Error code Controller code Trouble Fuel supply pump solenoid 1: Disconnection in wiring (KA) (Engine controller system) CALL E03 AD11KA ENG Contents of trouble • Disconnection in wiring occurred in fuel supply pump solenoid 1 (PCV1). Action of controller • Flashes caution lamp and turns on caution buzzer. • Limits engine and transmission operation. • Stops output to fuel supply pump solenoid 1 circuit.
Problem that appears on machine • Once machine is stopped, engine speed is limited to medium (half). • Once machine is stopped, running is limited to F1 and R1. • If codes [AD51KA] and [AD51KB] are displayed at the same time, engine stops. Related information • The special adapter (799-601-9430) is necessary for troubleshooting of fuel supply pump solenoid 1. • Method of reproducing error code:
Engine start Possible causes and standard value in normal state Cause Defective fuel supply pump 1 solenoid 1 (Internal discon- nection in wiring) Disconnection in wiring har- ness (Disconnection in wir- 2 ing or defective contact in connector) Defective harness ground- 3 ing (Contact with ground cir- cuit) 4 Defective engine controller Standard value in normal state/Remarks on troubleshooting Defective fuel supply pump solenoid 1 (Internal discon- nection in wiring) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. PCV1 (male) Resistance Between (1) – (2) 2.3 – 5.3z Between (1) – chassis ground Min.
1Mz Disconnection in wiring har- ness (Disconnection in wir- ing or defective contact in connector) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Wiring harness between EGC3 (female) (12) – PCV1 (female) (1) Resistance Max. 1z Wiring harness between EGC3 (female) (22) – PCV1 (female) (2) Resistance Max. 1z Defective harness ground- ing (Contact with ground cir- cuit) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Wiring harness between EGC3 (female) (22) – PCV1 (female) (2) with chassis ground Resistance Min.
1Mz Defective engine controller aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. EGC3 (male) Resistance Between (12) – (22) 2.3 – 5.3z Between (12) (22) – chassis ground Min. 1Mz