TROUBLESHOOTING ERROR CODE ADAZKB ERROR CODE ADAZKB (NO.1, 2, AND 3 INJECTOR SOLENOIDS: SHORT (KB)) D85EX-15 20-429 (1) Action code Error code Controller code Trouble No.1, 2, and 3 injector solenoids: Short (KB) (Engine controller system) CALL E03 ADAZKB ENG Contents of trouble • Overcurrent occurred in the No.1 injector solenoid (TWV#1), No.2 injector solenoid (TWV#2), or No.3 injector solenoid (TWV#3). Action of controller • Flashes caution lamp and turns on caution buzzer. • Limits engine and transmission operations. • Stops output to the No.1, 2, and 3 injector solenoid circuits. Problem that appears on machine • Once machine is stopped, engine speed is limited to medium (half).
• Once machine is stopped, running is limited to F1 and R1. • Engine output reduces extremely. Related information • Method of reproducing error code: Engine start Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective No.1 injector sole- noid (Internal short) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. CN1 (male) Resistance Between (1) – (2) 0.4 – 1.1z Between (1) (2) – chassis ground Min. 1Mz 2 Defective No.2 injector sole- noid (Internal short) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON.
CN2 (male) Resistance Between (1) – (2) 0.4 – 1.1z Between (1) (2) – chassis ground Min. 1Mz 3 Defective No.3 injector sole- noid (Internal short) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. CN3 (male) Resistance Between (1) – (2) 0.4 – 1.1z Between (1) (2) – chassis ground Min. 1Mz 4 Defective harness ground- ing (Contact with ground cir- cuit) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Wiring harness between EGC3 (female) (14) – CN1 (female) 1) with chassis ground Resistance Min.
1Mz Wiring harness between EGC3 (female) (24) – CN1 (female) (2) with chassis ground Resistance Min. 1Mz Wiring harness between EGC3 (female) (6) – CN2 (female) 1) with chassis ground Resistance Min. 1Mz Wiring harness between EGC3 (female) (16) – CN2 (female) (2) with chassis ground Resistance Min. 1Mz Wiring harness between EGC3 (female) (5) – CN3 (female) 1) with chassis ground Resistance Min. 1Mz Wiring harness between EGC3 (female) (15) – CN3 (female) (2) with chassis ground Resistance Min. 1Mz