Komatsu — ERROR CODE [ADD1KA] (NO.4 INJECTOR SOLENOID:DISCONNECTION IN WIRING(KA))

TROUBLESHOOTING ERROR CODE ADD1KA ERROR CODE ADD1KA (NO.4 INJECTOR SOLENOID: DISCONNECTION IN WIRING (KA)) Circuit diagram related to No.4 injector solenoid D85EX-15 20-433 (1) Action code Error code Controller cod e Trouble No.4 injector solenoid: Disconnection in wiring (KA) (Engine controller system) E02 ADD1KA ENG Contents of trouble • Disconnection in wiring occurred in the No.4 injector solenoid (TWV#4) circuit. Action of controller • Flashes caution lamp and turns on caution buzzer. • Stops output to the No.4 injector solenoid circuit. Problem tha appears on machine t • Engine output reduces. Related information • Method of reproducing error code:

Engine start Possible caus and standard value in norma state Cause Defective No.4 injector sole- 1 noid (Internal disconnection in wiring) es Disconnection in wiring har- ness (Disconnection in wir- l 2 ing or defective contact in connector) 3 Defective engine controller Standard value in normal state/Remarks on troubleshooting aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. CN4 (male) Resistance Between (1) and (2) 0.4 – 1.1z aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Wiring harness between EGC3 (female) (26) – CN4 (female) (1) Resistance Max.

1z Wiring harness between EGC3 (female) (36) – CN4 (female) (2) Resistance Max. 1z aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. EGC3 (male) Resistance Between (26) and (36) 0.4 – 1.1z