Komatsu — ERROR CODE [ADDZKB] (NO.4.5,AND 6 INJECTOR SOLENOIDS:SHORT(KB))

TROUBLESHOOTING ERROR CODE ADDZKB ERROR CODE ADDZKB (NO.4, 5, AND 6 INJECTOR SOLENOIDS: SHORT (KB)) 20-434 D85EX-15 (1) Action code Error code Controller code Trouble No.4, 5, and 6 injector solenoids: Short (KB) (Engine controller system) CALL E03 ADDZKB ENG Contents of trouble • Overcurrent occurred in the No.4 injector solenoid (TWV#4), No.5 injector solenoid (TWV#5), or No.6 injector solenoid (TWV#6). Action of controller • Flashes caution lamp and turns on caution buzzer. • Limits engine and transmission operations. • Stops output to the No.4, 5, and 6 injector solenoid circuits. Problem that appears on machine • Once machine is stopped, engine speed is limited to medium (half).

• Once machine is stopped, running is limited to F1 and R1. • Engine output reduces extremely. Related information • Method of reproducing error code: Engine start Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective No.4 injector sole- noid (Internal short) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. CN4 (male) Resistance Between (1) – (2) 0.4 – 1.1z Between (1) (2) – chassis ground Min. 1Mz 2 Defective No.5 injector sole- noid (Internal short) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON.

CN5 (male) Resistance Between (1) – (2) 0.4 – 1.1z Between (1) (2) – chassis ground Min. 1Mz 3 Defective No.6 injector sole- noid (Internal short) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. CN6 (male) Resistance Between (1) – (2) 0.4 – 1.1z Between (1) (2) – chassis ground Min. 1Mz 4 Defective harness ground- ing (Contact with ground cir- cuit) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Wiring harness between EGC3 (female) (26) – CN4 (female) (1) with chassis ground Resistance Min.

1Mz Wiring harness between EGC3 (female) (36) – CN4 (female) (2) with chassis ground Resistance Min. 1Mz Wiring harness between EGC3 (female) (34) – CN5 (female) (1) with chassis ground Resistance Min. 1Mz Wiring harness between EGC3 (female) (33) – CN5 (female) (2) with chassis ground Resistance Min. 1Mz Wiring harness between EGC3 (female) (25) – CN6 (female) (1) with chassis ground Resistance Min. 1Mz Wiring harness between EGC3 (female) (35) – CN6 (female) (2) with chassis ground Resistance Min. 1Mz