Komatsu — ERROR CODE [DB29KQ] (ENGINE CONTROLLER TYPE SELECT:TYPE SELECT SIGNAL INCONSISTENCY (KQ))

TROUBLESHOOTING ERROR CODE DB29KQ ERROR CODE DB29KQ (ENGINE CONTROLLER TYPE SELECT: TYPE SELECT SIGNAL INCONSISTENCY (KQ)) Circuit diagram related to engine controller type select D85EX-15 20-471 (1) Action code Error code Controller code Trouble Engine controller type select: Type select signal inconsistency (KQ) (Engine controller system) CALL E03 DB29KQ ENG Contents of • trouble Type select signal directly acquired by engine controller is inconsistent with type select signal acquired via communication. • Action of • controller • Flashes caution lamp and turns on caution buzzer. Controls it as default-set type. Limits operation of engine and transmission.

Problem that • appears on • machine • Machine does not provide normal output. Once machine is stopped, engine speed is limited to medium (half). Once machine is stopped, travel is limited to F1 and R1. Related • information Method of reproducing error code: Turn starting switch ON. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Disconnection in wiring har- ness (Disconnection in wir- ing or defective contact in connector) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Wiring harness between EGC1 (female) (3) – chassis ground Resistance Max.

1z 2 Defective engine controller aPrepare with starting switch OFF, turn starting switch ON and carry out troubleshooting. EGC1 Resistance Between (3) – chassis ground Max. 1z Between (7), (8) – chassis ground Max. 1z