Komatsu — ERROR CODE [DH21KA] (HSS AND WORK EQUIPMENT PUMP OIL PRESSURE SENSOR:DISCONNECTION (KA))

TROUBLESHOOTING ERROR CODE DH21KA ERROR CODE DH21KA (HSS AND WORK EQUIPMENT PUMP OIL PRESSURE SENSOR: DISCONNECTION (KA)) Circuit diagram related to work equipment pump oil pressure sensor 20-498 D85EX-15 (1) Action co de Error code Co ntroller code Trouble HSS and work equipment pump oil pressure sensor: Discon- nection (KA) (Steering and transmission controller system) E01 St DH21KA tr eering and ansmission Contents trouble of • Signal voltage of work equipment pump oil pressure sensor circuit is below 0.5V. Action o controlle f • Does not take any particular action. r Problem th appears o machine at n • Work equipment pump oil pressure cannot be monitored.

Related informatio • Input (Voltage) from work equipment pump oil pressure sensor can be checked in monitoring mode. (Code 70701: Voltage of work equipment pump oil sensor) n • Method of reproducing error code: Turn starting switch ON.

Possible cau and standard value in norm state Cause Defective 24V power source 1 system Defective work equipment 2 pump oil pressure sensor (Internal trouble) Disconnection in wiring har- ses ness (Disconnection in wir- 3 ing or defective contact in al connector) Short circuit with chassis 4 ground in wiring harness (Contact with ground circuit Defective steering and 5 transmission controller Standard value in normal state/Remarks on troubleshooting Defective 24V power source system See if error code [DAQ6KK] is displayed. If it is displayed, carry out troubleshooting for it first.

Defective work equipment pump oil pressure sensor (Internal trouble) aPrepare with starting switch OFF, turn starting switch ON and carry out troubleshooting. HHP Voltage Between (C) – (A) 0.5 – 6.0V Voltage 0.5 – 6.0V Disconnection in wiring har- ness (Disconnection in wir- ing or defective contact in connector) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Wiring harness between STC1 (female) (16) – Resistance Max. 1z HHP (female) (B) Wiring harness between STC1 (female) (1) – Resistance Max. 1z HHP (female) (C) Resistance M ax. 1z Resistance M ax.

1z Short circuit with chassis ground in wiring harness (Contact with ground circuit aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Short circuit of wiring harness between STC1 Min. ) (female) (1)– HHP (female) (C) with chassis Resistance 1Mz ground Resistance Min. 1Mz Defective steering and transmission controller aPrepare with starting switch OFF, turn starting switch ON and carry out troubleshooting. STC1 (female) Voltage Between (1) – (21) 0.5 – 6.0V Voltage 0.5 – 6.0V