TROUBLESHOOTING ERROR CODE DK30KB ERROR CODE DK30KB (STEERING POTENTIOMETER 1: SHORT CIRCUIT (KB)) Circuit diagram related to steering potentiometer 20-510 D85EX-15 (5) Action co de Error cod e Controller code Trouble Steering potentiometer 1: Short circuit (KB) (Steering and transmission controller system) CALL E0 3 DK30KB Steering and transmission Contents trouble of • Signal voltage of steering potentiometer 1 system is above 4.5V. Action o controlle • Flashes caution lamp and turns on caution buzzer. f • Continues controlling with signal of steering potentiometer 2 system. r • Limits operation of engine and transmission.
Problem t appears machin hat • Once machine is stopped, engine speed is limited to medium (half). on • Once machine is stopped, travel is limited to F1 and R1. e Related informati • Input (Voltage) from steering potentiometer 1 can be checked in monitoring mode. (Code 50300: Voltage of steering potentiometer 1) on • Method of reproducing error code: Turn starting switch ON and operate PCCS lever (for steering).
Possible cau and standar value in nor state Cause Defective 5V sensor power 1 source system Defective steering potenti- 2 ometer 1 (Internal discon- nection or short circuit) ses d mal Short circuit with power 3 source in wiring harness (Contact with 24V circuit) Defective steering and 5 transmission controller Standard value in normal state/Remarks on troubleshooting Defective 5V sensor power source system See if error code [DAQ5KK] [DB35KK] is displayed. If it is displayed, carry out troubleshooting for it first.
Defective steering potenti- ometer 1 (Internal discon- nection or short circuit) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. TL2 (male) Resistance Between (5) – (8) 3.2kz ± 20% Between (7) – (5) 1 – 6 kz (Right – Left steering) Between (7) – (8) 6 – 1 kz (Right – Left steering) Short circuit with power source in wiring harness (Contact with 24V circuit) aPrepare with starting switch OFF, then turn starting switch ON and carry out troubleshooting. Short circuit of wiring harness between STC1 (female) (2) – TL2 (female) (7) with chassis ground Voltage Max.
1V Defective steering and transmission controller aPrepare with starting switch OFF, then turn starting switch ON and carry out troubleshooting. STC1 Voltage Between (2) – (21) 0.5 – 4.5V