TROUBLESHOOTING ERROR CODE DK30KX, ERROR CODE DK30KZ ERROR CODE DK30KX (STEERING POTENTIOMETER: INPUT SIGNAL IS OUT OF NORMAL RANGE (KX)) ERROR CODE DK30KZ (STEERING POTENTIOMETER: DISCONNECTION OR SHORT CIRCUIT (Double trouble) (KZ)) D85EX-15 20-511 (1) Action code Error code Controller code Trouble Steering potentiometer: Input signal is out of normal range (KX) (Steering and transmission controller system) CALL E04 DK30KX Steering and transmission Contents of trouble • Either of error codes [DK30KA] and [DK30KB] of steering potentiometer systems 1 and 2 and error codes [DK31KA] and [DK31KB] are displayed simultaneously.
Action of controller • Flashes caution lamp and turns on caution buzzer. • Limits operation of engine, transmission, and brake. Problem that appears on machine • Once machine is stopped, engine speed is limited to medium (half). • Once machine is stopped, it cannot travel any more. Related information • Input (Voltage) from steering potentiometers can be checked in monitoring mode. (Code 50300: Voltage of steering potentiometer 1) (Code 50301: Voltage of steering potentiometer 2) • Method of reproducing error code: Turn starting switch ON and operate PCCS lever (for steering).
Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting Carry out troubleshooting for error codes [DK30KA], [DK30KB], [DK31KA], and [DK31KB]. Action code Error code Controller code Trouble Steering potentiometer: Disconnection or short circuit (KZ)) (Steering and transmission controller system) CALL E04 DK30KZ Steering and transmission Contents of trouble • When starting switch is turned ON, either of steering potentiometer systems 1 and 2 is abnormal, then either of error codes [DK30KA] and [DK30KB] and error codes [DK31KA] and [DK31KB] are displayed simultaneously.
Action of controller • Flashes caution lamp and turns on caution buzzer. • Limits operation of engine, transmission, and brake. Problem that appears on machine • Once machine is stopped, engine speed is limited to medium (half). • Once machine is stopped, it cannot travel any more. Related information • Input (Voltage) from steering potentiometers can be checked in monitoring mode. (Code 50300: Voltage of steering potentiometer 1) (Code 50301: Voltage of steering potentiometer 2) • Method of reproducing error code: Turn starting switch ON and operate PCCS lever (for steering).
Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting Carry out troubleshooting for error codes [DK30KA], [DK30KB], [DK31KA], and [DK31KB].