Komatsu — ERROR CODE [DW7BKA] (FAN REVERSE SOLENOID : DISCONNECTION (KA))

TROUBLESHOOTING ERROR CODE DW7BKA ERROR CODE DW7BKA (FAN REVERSE SOLENOID: DISCONNECTION (KA)) Circuit diagram related to fan reverse solenoid 20-534 D85EX-15 (1) Action cod e Error code C ontroller code Trouble Fan reverse solenoid: Disconnection (KA) (Steering and transmission controller system) — DW7BKA Steering and transmission Contents o trouble f • When signal is output to fan reverse solenoid circuit, any current does not flow. Action of controller • Stops outputting to fan reverse solenoid circuit. Problem tha appears on machine t • The fan reversing function cannot be used. Related information • Output (Current) to fan reverse solenoid can be checked in monitoring mode. (Code 40909:

Cooling fan reverse solenoid output current) • Method of reproducing service code: Turn starting switch ON and operate fan in reverse. Possible caus and standard value in norm state Cause Defective fan reverse sole- 1 noid (Internal disconnec- tion) Disconnection in wiring har- ness (Disconnection in wir- 2 es ing or defective contact in connector) al Short circuit with power 3 source in wiring harness (Contact with 24V circuit) Defective steering and 4 transmission controller Standard value in normal state/Remarks on troubleshooting fan reverse sole- rnal disconnec- aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON.

FARC (male) Resistance Between (1) – (2) 34 – 44z ction in wiring har- connection in wir- ective contact in ) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Wiring harness between STC3 (female) (18) – FAR2 (female) (1) Resistance Max. 1z Wiring harness between STC3 (female) (13) – FAR2 (female) (2) Resistance Max. 1z uit with power wiring harness with 24V circuit) aPrepare with starting switch OFF, then turn starting switch ON and carry out troubleshooting. Short circuit of wiring harness between STC3 (female) (18) – FAR2 (female) (1) with chassis ground Voltage Max.

1V steering and ion controller aPrepare with starting switch OFF, then turn starting switch ON and carry out troubleshooting. STC3 (female) Resistance Between (18) – (13) 15 – 25z