Komatsu — ERROR CODE [DXH4KB] (1ST CLUTCH ECMV: SHORT CIRCUIT (KB))

TROUBLESHOOTING ERROR CODE DXH4KB ERROR CODE DXH4KB (1ST CLUTCH ECMV: SHORT CIRCUIT (KB)) Circuit diagram related to transmission 1st clutch ECMV D85EX-15 20-545 (1) Action code Error code C ontroller code Trouble 1st clutch ECMV: Short circuit (KB) (Steering and transmission controller system) CALL E03 DXH4KB Steering and transmission Contents of • trouble When signal was output to transmission 1st clutch solenoid circuit, abnormal current flowed. • Action of • controller • Flashes caution lamp and turns on caution buzzer. Stops outputting to transmission 1st clutch solenoid circuit. Limits operation of engine and transmission.

Problem that • appears on • machine • Automatic shift-down function does not work. Once machine is stopped, engine speed is limited to medium (half). Once machine is stopped, travel is limited to F2 and R2. • Related information • Output (Current) to 1st clutch solenoid can be checked in monitoring mode. (Code 31602, 31612: Output current of 1st clutch ECMV) Method of reproducing service code: Start engine and drive machine in F1 or R1.

Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting Defective 1st clutch ECMV 1 (Internal short circuit) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. S1T (male) Resistance Between (1) – (2) 5 – 25z Between (1) – chassis ground Min. 1Mz Short circuit with chassis 2 ground in wiring harness (Contact with ground circuit) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Short circuit of wiring harness between STC3 (female) (6) – S1T (female) (1) with chassis ground Resistance 1 Min.

Mz Short circuit in wiring har- 3 ness (with another wiring harness) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Short circuit in wiring harness between STC3 (female) (6) – S1T (female) (1) with wiring har- ness between STC3 (female) (23) – S1T (fe- male) (2) Resistance 1 Min. Mz Defective steering and 4 transmission controller aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. STC3 Resistance Between (6) – (23) 5 – 25z Between (6) – chassis ground Min. 1Mz