Komatsu — E-23 THE HEAD LAMP, REAR LAMP, AND RIPPER POINT LAMP DO NOT LIGHT UP

TROUBLESHOOTING E-23 D85EX-15 20-633 (1) Trouble (3) • Only the rear lamp does not light up. Related information — Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective rear lamp (Break- age of bulb) The rear lamp may be defective. Check the bulb directly for breakage. 2 Disconnection in wiring har- ness (Disconnection in wir- ing or defective contact in connector) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Wiring harness between RWL (female) (3) – 224 (female) (1) Resistance Max. 1z Trouble (4) • Only the ripper point lamp does not light up.

Related information — Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective ripper point lamp (Breakage of bulb) The ripper point lamp may be defective. Check the bulb directly for breakage. 2 Disconnection in wiring har- ness (Disconnection in wir- ing or defective contact in connector) aPrepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Wiring harness between RWL (female) (3) - 226 (female) (1) Resistance Max. 1z