STRUCTURE, FUNCTION AND MAINTENANCE STANDARD TRANSMISSION Unit: mm D85EX-15 10-23 No. Check item Criteria Remedy 1 No. 1 clutch spring (10 pcs.) Standard size Repair limit Replace Free length Installed length Installed load Free length Installed load 77 60 120.6N {12.3 kg} 74.7 114.5N {11.6 kg} 2 No. 2 clutch spring (10 pcs.) 77 63 99.5N {10.2 kg} 74.7 94.5N {9.6 kg} 3 No. 3 clutch spring (10 pcs.) 59 37.5 206.8N {21.1 kg} 57.2 196.4N {20.0 kg} 4 No. 4 clutch spring (10 pcs.) 59 37.5 206.8N {21.1 kg} 57.2 196.4N {20.0 kg} 5 No. 5 clutch spring (10 pcs.) 59 45 137.3N {14.0 kg} 57.2 130.4N {13.3 kg} 6 Thickness of clutch disc (No.
1, 2 clutches) Standard size Tolerance Repair limit 5.0 ± 0.1 4.4 7 Thickness of clutch disc (No. 3 – 5 clutches) 5.0 ± 0.1 4.3 8 Thickness of clutch plate (No. 1 – 5 clutches) 3.2 ± 0.1 2.9 9 Total thickness of No. 1 clutch (5 discs and 5 plates) 41.0 ± 0.3 38.9 10 Total thickness of No. 2 clutch (5 discs and 5 plates) 46.0 ± 0.4 43.7 11 Total thickness of No. 3 clutch (3 discs and 2 plates) 21.4 ± 0.3 20.2 12 Total thickness of No. 4 clutch (3 discs and 2 plates) 21.4 ± 0.3 20.2 13 Total thickness of No.
5 clutch (3 discs and 2 plates) 21.4 ± 0.3 20.2 14 Backlash between each sun gear and planetary pinion (Forward, re- verse, 2nd – 3rd gear speeds) Standard clearance 0.13 – 0.32 15 Backlash between planetary gear and internal teeth of ring gear (Reverse gear speed) 0.13 – 0.37 16 Backlash between planetary pin- ion and internal teeth of ring gear (Forward, 1st and 3rd gear speeds) 0.14 – 0.37 17 Backlash between each carrier and internal teeth of ring gear (Reverse and 1st gear speeds) 0.18 – 0.54 18 Backlash between carrier and in- ternal teeth of ring gear (Forward gear speed) 0.18 – 0.54 19 Backlash between sun gear and planetary pinion (1st gear speed) 0.14 – 0.35 20 Backlash between planetary gear and internal teeeth of ring gear (2nd gear speed) 0.13 – 0.32