STRUCTURE, FUNCTION AND MAINTENANCE STANDARD TRANSMISSION Operation Clutch disengaged (free) When the supply of pressure oil from the control valve is shut off, piston (12) is returned to its orig- inal position by the force of piston return spring (33). This relieves the frictional force between plates (11) and discs (10), making the ring gear (hub) (34) free. Operation of disc clutch To lock ring gear (hub) (34) a disc clutch is used. The clutch consists of piston (12), plates (11), discs (10), pin (35) and piston return springs (33). The internal teeth of the disc engage with the external teeth of the ring gear.
The teeth on the outside diameter of the plate engage with pins (35) secured by housing (32). Clutch engaged (locked) Oil from the control valve flows under pressure through the port in housing (32) to the back of piston (12). The piston presses plates (11) and discs (10) together, and the resulting frictional force stops the rotation of discs so ring gear (hub) (34) meshing with the internal teeth of the disc is locked. 10-24 D85EX-15