Komatsu — REMOVAL

DISASSEMBLY AND ASSEMBLY FUEL SUPPLY PUMP REMOVAL AND INSTALLATION OF FUEL SUPPLY PUMP ASSEMBLY SPECIAL TOOLS 6. Remove the 2 clamps of air conditioner hose (4). REMOVAL 7. Disconnect 3 fuel supply pump wiring connectors PCV1 (5), PCV2 (6), and G (7), and then remove 2 clamps (8). k Disconnect the cable from the negative (–) ter- minal of the battery. 1. Release the residual pressure from the fuel sys- tem. For details, see TESTING AND ADJUST- ING, Releasing residual pressure from fuel system. 2. Close the fuel supply valve of the fuel tank. 3. Open engine undercover (1). 8.

Disconnect 1 air conditioner wiring connector (9) and remove the compressor mounting bolts, and then remove the belt and compressor (10). a Move the compressor aside. 4. Open engine left side cover (2). 5. Remove side cover (3). D85EX-15 30-13 (3) Symbol Part No. Part name Necessity Q'ty New/Remodel Sketch A1 795-471-1800 Remover t 1 N 1 • 795-471-1810 • Plate 1 N 2 • 795-471-1820 • Bolt 1 N 3 • 795-471-1830 • Bracket 1 N 4 • 01435-01035 • Bolt 3 5 • 01435-01025 • Bolt 1