DISASSEMBLY AND ASSEMBLY FUEL SUPPLY PUMP 9. Remove compressor bracket (11). 14. Removal of fuel supply pump. 1) Remove the No. 1 head cover. 2) Rotate the crankshaft forward to bring the stamped "1.6TOP" line to pointer (26) and set the No. 1 cylinder to the compression top dead center. a Rotate the crankshaft with the damper mounting bolt. a When the No. 1 cylinder is at the com- pression top dead center, the rocker arms on both intake side and exhaust side of the No. 1 cylinder can be moved by the valve clearance with the hand. If the rocker arms cannot be moved, rotate the crankshaft one more turn. 10. Disconnect fuel return hose (12) from the pump. [*1] 3) Remove cover (25).
a Remove the lower mounting bolt (1 piece) through the engine front support. 11. Remove 4 high-pressure pipe clamps, (13), (14), (15), and (16) and 2 high-pressure pipes (17) and (18). [*2] a Clamp (14) is on the back side of the oil sup- ply pipe. 12. Remove clamp (19) and disconnect lubrication tube (20). [*3] 13. Disconnect fuel filter tubes (21), (22), and (23) and fuel hose (24). [*4] 30-14 D85EX-15 (3)