DISASSEMBLY AND ASSEMBLY FUEL SUPPLY PUMP 4) Remove gear mounting nut (38) and washer (39). a Take great care not to drop the nut and washer in the case. 8) Install bracket A1-3 to the case. 9) Rotate the crankshaft to match tap hole e of plate A1-1 and secure bracket A1-3 with bolt A1-5 . At this time, the key of the supply pump must be at the upper position. 5) Insert plate A1-1 with its shouldered side toward the gear and tighten bolt A1-2 with your fingers (about 5 turns). 10) Remove fuel supply pump lower bracket mounting bolt (28) and spacer (29). 6) Tighten gear fixing bolt A1-4 with your fin- gers. a Set tap hole e of plate A1-1 down.
7) Rotate the crankshaft 1 turn again (forward) to set lower gear fixing bolt hole f up, and then tighten bolt A1-4 with your fingers. 11) Remove 4 mounting bolts (31). Tighten 1 mounting bolt on the upper side temporarily as a guide bolt. D85EX-15 30-15 (3)