Komatsu — REMOVAL

DISASSEMBLY AND ASSEMBLY ENGINE CYLINDER HEAD 31. Lift off turbocharger and exhaust manifold assembly (48). 34. Remove aftercooler cooling outlet tube (53). a Since tube (53) is fitted deeply on the air intake manifold side, remove the clamp of tube (54) on the cylinder block side, too. [*12] 4 Turbocharger and exhaust manifold assem- bly: 44 kg 32. Remove clamp (49) of the damper oil level detection pipe and oil level detection pipe bracket (50). 35. Remove 2 couples of high-pressure pipe clamps (55) and (56) and ribbon heater wiring harness clamp (57). [*13] 33. Remove aftercooler cooling inlet tube (51).

a Since tube (51) is fitted deeply on the air intake manifold side, remove the clamp of tube (52) on the cylinder block side, too. [*11] 36. Remove 2 high-pressure pipe clamps (58). [*14] 37. Sling the air intake manifold temporarily and remove air intake manifold mounting bolts (59). [*15] a When removing oil supply pipe bracket (60), take care of the spacer. [*16] D85EX-15 30-31 (2)