DISASSEMBLY AND ASSEMBLY ENGINE CYLINDER HEAD 38. Lift off air intake manifold assembly (61). 44. Remove spill tube (69). [*20] 39. Remove ribbon heater assembly (62). a When slinging the air intake manifold assem- bly, take care of the ribbon heater assembly which comes off the assembly. 45. Remove breather hose (70) of No. 1 head cover. 46. Loosen 6 high-pressure pipe joint bolts (71) on the head side and remove 6 high-pressure pipes (72). [*21] 40. Remove high-pressure pipe clamp (63) on the common rail side and cover (64), and then remove gate-type bracket (65). [*17] 47. Remove 6 head covers (73). [*22] 48. Disconnect wiring harness (74) from the injector. [*23] 41.
Remove cooling water tube (66). 42. Remove each high-pressure pipe cap (67). [*18] 49. Remove rocker shaft mounting bolt (75) and rocker arm and rocker shaft assembly (76). [*24] 43. Remove 6 high-pressure pipe joint bolts (68) on the common rail side. [*19] 30-32 D85EX-15 (2)