DISASSEMBLY AND ASSEMBLY ENGINE CYLINDER HEAD 50. Remove 2 push rods (77). INSTALLATION 51. Remove injector mounting bolt (78) and injector assembly (79). [*25] Carry out installation in the reverse order to removal. [*1] 3 Hose clamp: 8.8 ± 0.5 Nm {0.9 ± 0.5 kgm} [*2] 3 Band clamp: 9.8 – 11.76 Nm {1.0 – 1.2 kgm} [*3] 3 Wiring harness mounting nut: 2.5 – 2.9 Nm {0.25 – 0.3 kgm} 52. Remove 6 mounting bolts (80) and rocker hous- ing (81). [*26] [*4] 3 Hose clamp: 6.8 ± 0.49 Nm {69 ± 5 kgcm} 53. Remove 6 cylinder head mounting bolts (82), 1 auxiliary bolt (83), and cylinder head assembly (84). [*27] [*5] 3 Joint bolt on engine block side: 24.5 – 34.3 Nm {2.5 – 3.5 kgm} [*6] 3 Hose clamp:
5.9 ± 0.49 Nm {0.6 ± 0.05 kgm} [*7] Length of spacer: L = 84 mm (2 pieces) [*8] Length of spacer: L = 60.5 mm (2 pieces) L = 108.5 mm (8 pieces) [*9] Length of spacer: L = 18 mm (4 pieces) D85EX-15 30-33 (2)