DISASSEMBLY AND ASSEMBLY ENGINE OIL PAN 14. Remove oil suction pipe (15) and pipe bracket (16) together. INSTALLATION Carry out installation in the reverse order to removal. [*1] 3 Drain plug: 127.4 – 176.4 Nm {13 – 18 kgm} [*2] Length of spacer: L = 98.5 mm (2 pieces) [*3] 3 Mounting bolt: 98.1 – 122.6 Nm {10 – 12.5 kgm} 15. Pull oil pan (13) forward to remove it. 4 Oil pan: 26 kg [*4] 2 Mating face of oil pan: Gasket sealant (LG-7) Refilling with water Add water through the water filler to the specified level. Run the engine to circulate the water through the system. Then, check the water level again. 5 Cooling water: Approx.
80 l Refilling with oil Tighten the drain plug and add oil through the engine oil filler to the specified level. Run the engine to circulate the oil through the system. Then, check the oil level again. 5 Oil pan: Approx. 47 l 30-38 D85EX-15 (2)