DISASSEMBLY AND ASSEMBLY ENGINE OIL PAN 8. Disconnect universal joint assembly (9). [*3] 11. Push up the damper until clearance a of both rear engine mounts (10) and (11) is 25 mm. a This work must be performed to prevent the main cap of No. 6 engine cylinder from inter- fering with the oil pan when the oil pan is pulled out. 9. Remove the mounting bolts of both rear engine mounts (10) and (11). 12. Remove the mounting bolts of engine oil pan (13). [*4] 10. Set jack [1] under damper (12) to push up the damper. 13. Pull oil pan (13) forward until it can pass main cap (14) of No. 6 engine cylinder. D85EX-15 30-37 (2)