Komatsu — REMOVAL

DISASSEMBLY AND ASSEMBLY ENGINE OIL PAN REMOVAL AND INSTALLATION OF ENGINE OIL PAN REMOVAL k Disconnect the cable from the negative (–) ter- minal of the battery. 5. Loosen the clamp and disconnect radiator tube hose (6) on the cylinder block side. 1. Open undercovers (1) and (2) and remove undercover (3). 6. Loosen the clamp and disconnect tube hose (7) on the upper side of the radiator. 2. Drain the engine oil. [*1] 6 Engine oil: Approx. 47 l a Remove the engine oil level gauge. 3. Drain the cooling water from the radiator. 6 Cooling water: Approx. 80 l 4. Open both engine side covers (4) and remove both side covers (5). 7. Remove tube assembly (8) on the upper side of the radiator.

a Take care of the spacer. [*2] 30-36 D85EX-15 (2)