Komatsu — REMOVAL

DISASSEMBLY AND ASSEMBLY RADIATOR REMOVAL AND INSTALLATION OF RADIATOR ASSEMBLY REMOVAL k Disconnect the cable from the negative (–) ter- minal of the battery. 5. Disconnect right and left head lamp wiring con- nectors 203 and 204 (8). 1. Drain the cooling water from the radiator. 6 Cooling water: Approx. 80 l 2. Open undercover (1) and guard (2). 6. Disconnect fan motor solenoid wiring connector FAR2 (9) and horn wiring connector 205 (10). 3. Disconnect radiator bypass inlet hose (3), radia- tor outlet hose (4), power train oil cooler inlet hose (5), and outlet hose (6). [*1] 7.

Disconnect radiator water level sensor wiring connector WLD (11) and remove the 2 clamps of wiring harness assembly (12). a Pull out the wiring harness assembly and place it on the hood. 4. Remove radiator upper cover (7). 8. Disconnect radiator inlet hose (13), reservoir hose (14), and aeration hose (15). 9. Remove windbreak plate (16). [*2] D85EX-15 30-41 (2)