DISASSEMBLY AND ASSEMBLY RADIATOR 10. Remove hydraulic oil cooler assembly (17). a Move the oil cooler assembly aside. 13. Sling the radiator assembly temporarily and remove 2 mounting bolts (21) on each side. 11. Remove both fan guards (18) and (19). 14. Lift off the radiator assembly (22). 4 Radiator assembly: 286 kg 12. Remove 2 mounting bolts (20) of radiator lower bracket. a The lower bracket is between the fan and radiator. INSTALLATION Carry out installation in the reverse order to removal. [*1] 3 Radiator bypass inlet hose (3): 8.8 ± 0.5 Nm {90 ± 5 kgcm} 3 Radiator outlet hose (3): 8.8 ± 0.5 Nm {90 ± 5 kgcm} [*2] a Fit the rubber windbreak plate to the radiator tank securely.
Refilling with water Add water through the water filler to the specified level. Run the engine to circulate the water through the system. Then, check the water level again. 5 Cooling water: Approx. 80 l 30-42 D85EX-15 (2)