DISASSEMBLY AND ASSEMBLY ENGINE REMOVAL AND INSTALLATION OF ENGINE ASSEMBLY SPECIAL TOOLS 6. Remove engine side covers (3) and plates (4) on both sides. REMOVAL k Disconnect the cable from the negative (–) ter- minal of the battery. a For the method of changing the fuel injection amount adjustment after the engine assem- bly or engine controller is replaced, ask your Komatsu distributor. 7. Disconnect centralized connectors E21 (5) and E22 (6). 1. Drain the cooling water. 6 Cooling water: Approx. 80 l 2. Remove the engine hood assembly. For details, see REMOVAL OF ENGINE HOOD ASSEMBLY. 3. Remove the radiator assembly. For details, see REMOVAL OF RADIATOR ASSEMBLY. 4.
Close the fuel supply valve of the fuel tank. 8. Remove fresh air suction tube (7). 5. Open undercovers (1) and (2). D85EX-15 30-43 (5) Symbol Part No. Part name Necessity Q'ty New/Remodel Sketch X2 799-703-1200 Service tool KIT t 1 799-703-1100 Vacuum pump (100V) t 1 799-703-1110 Vacuum pump (220V) t 1 799-703-1120 Vacuum pump (240V) t 1 799-703-1401 Gas leak detector t 1