Komatsu — ASSEMBLY

DISASSEMBLY AND ASSEMBLY DAMPER ASSEMBLY 3) Install flange (12) and secure it with bolts (11). 1. Assembly of damper assembly (10) 1) Set flange (16) and outer body (13) to cylin- der [2], matching their bolt holes, and install inner body (14). 3 Flange mounting bolt: 58.8 – 73.5 Nm {6 – 7.5 kgm} 2 Mating faces of flange and outer body: Gasket sealant (LG-6) 2 Inside of outer body: Grease (G2-LI) 2 Cushion contact surface of inner body: Grease (G2-LI) 4) Fill with grease. Fill part b of the inner body with 80 g of grease. 2 Grease: 2) Install cushion (15). a Apply grease (G2-LI) all over the cush- ion.

a After installing the cushion, fill the clear- ance a between the inner body (14) and outer body (13) (16 places) with grease of 30%. 30-52 D85EX-15 (2) M A di lu olybdenum • sulfide dry bricant Sumiko lubricant: Rocol Dry Splay or equivalent Ex su B gr tai de treme pres- • re lithium ease con- • ning molyb- num • Kyodo Yushi: Morilex No. 2 Showa-Shell: Letinax AM Nippon oil: Moritex