Komatsu — ASSEMBLY

DISASSEMBLY AND ASSEMBLY DAMPER 2. Assembly of damper cover assembly (1) 1) Using push tool [3], press fit outer races (7-4) and (7-5) of bearing (7) to cover (2). 4) Set cover (2) to shaft (6). Using tool B , press fit bearing inner race (7-3). 5) Fit oil seals (8) and (9) to cover assembly (2). 2 Press fitting face of oil seal: Gasket sealant (LG-6) 2 Oil seal lip: Grease (G2-LI) 2) Press fit inner race (7-1) of bearing (7) to shaft (6) with tool B . a Apply the gasket sealant thinly to the oil seal surface and wipe off projected part. 3) Install collar (7-2) and O-ring to shaft (6). 6) Install coupling (5) and holder (4) and secure them with bolts (3). 3 Coupling mounting bolt:

245 – 309 Nm {25 – 31.5 kgm} D85EX-15 30-53 (2)