Komatsu — REMOVAL

DISASSEMBLY AND ASSEMBLY POWER TRAIN UNIT REMOVAL AND INSTALLATION OF POWER TRAIN UNIT ASSEMBLY REMOVAL 8. Disconnect 2 ripper hoses (3). a Secure the ripper assembly. k Disconnect the cable from the negative (–) ter- minal of the battery. 9. Disconnect 2 blade tilt hoses (4). 1. Drain the oil. 6 Power train case: Approx. 100 l 10. Disconnect 2 HSS motor hoses (5). a Disconnect these hoses from the HSS motor, too. 6 Hydraulic tank: D85EX-15; Approx. 150 l D85PX-15; Approx. 140 l 11. Disconnect main hoses (6) of the HSS and work equipment pump. 2. Remove the engine hood assembly. For details, see REMOVAL OF ENGINE HOOD ASSEMBLY. 3. Remove the operator's cab assembly.

For details, see REMOVAL OF OPERATOR'S CAB ASSEMBLY. 4. Remove the floor frame assembly. For details, see REMOVAL OF FLOOR FRAME ASSEMBLY. 5. Remove the fuel tank assembly. For details, see REMOVAL OF FUEL TANK ASSEMBLY. 6. Remove power train undercover (1). 12. Disconnect breather hose (7) and oil level detec- tion pipe lower tube (8) from the steering case. 13. Remove clamp (9) and oil level detection pipe assembly (10). 14. Remove ripper hose clamp (11) and move the hose toward the ripper. 15. Remove blade lift hose clamp (12) and clamp bracket (13). 7. Remove work equipment valve cover (2). 30-54 D85EX-15 (2)