Komatsu — DISASSEMBLY

DISASSEMBLY AND ASSEMBLY TORQFLOW TRANSMISSION v) Drive out shaft (79) and remove thrust washer (80), No. 3 planetary gear (81), bearing (82), and ball (83). a Take care not to lose the ball. vi) Remove snap ring (84) and bearing (85). 3) Disassemble No. 5 carrier and No. 4 ring gear assembly according to the following proce- dure. i) Drive out shaft (93) and remove thrust washer (94), gear (95), bearing (96), and ball (97) from carrier (100). a Take care not to lose the ball. 15. No. 3 housing 1) Remove No. 3 housing (86). 2) Remove No. 3 piston (87). ii) Remove snap ring (98), then remove No. 4 ring gear (99) from carrier (100). 16. No. 4 discs, plates, and springs 1) Remove springs (88).

2) Remove discs (89) and plates (90). 18. No. 4 housing assembly 1) Remove No. 4 housing assembly (101). 2) Remove No. 4 piston (102). 19. Guide pin Remove guide pin (103). 17. No. 5 carrier and No. 4 ring gear assembly 1) Remove mounting bolts (91). 2) Remove No. 5 carrier and No. 4 ring gear assembly (92). 20. No. 5 discs, plates, and springs 1) Remove springs (104). 2) Remove discs (105) and plates (106). 30-66 D85EX-15 (2)