DISASSEMBLY AND ASSEMBLY TORQFLOW TRANSMISSION 3) Using eyebolts [3], install front plate (18), matching it to the guide pin and spring. 4) Press fit the inner race side of bearing (28) to No. 1 carrier (33) and install snap ring (17). a Check that the spring is fitted to the cover. 27. Transmission case Fit the O-ring and install transmission case (7), using eyebolts [2]. Then, install the remaining 9 tie bolts and 2 case clamping bolts. 3 Tie bolt: 166.7 ± 9.8 Nm {17 ± 1 kgm} 25. Tie bolts Install 4 tie bolts (8). 3 Tie bolt: 166.7 ± 9.8 Nm {17 ± 1 kgm} 28. Control valve 1) Place the transmission on its side. 2) Fit the O-ring and install control valve assem- bly (6). 26.
Operation check of piston Using tool D2 , check the operating condition and stroke of each piston. 3 Mounting bolt: 49 ± 4.9 Nm {5 ± 0.5 kgm} 30-74 D85EX-15 (2) Piston Standard stroke (mm) No.1 No.2 No.3 No.4 No.5 5 6 3 3 3