DISASSEMBLY AND ASSEMBLY TORQFLOW TRANSMISSION iv) Install snap ring (38) to input shaft (20), and then press fit bearing (39). 2) Sling and install input shaft and No. 1 carrier assembly (34), meshing No. 2 sun gear with No. 1 planetary gear. v) Install input shaft (20) to No. 1 carrier assembly (34), and then install snap ring (19). 23. No. 1 discs, plates, and springs Install discs (36), plates (37), and springs (35). a Disc: 5 pieces, Plates: 5 pieces a Free length of spring: 77 mm 24. Front plate 1) Fit seal ring (31) and install collar (32) to No. 1 carrier (33). vi) Install collar (15). vii) Install No. 1 sun gear (14). viii) Install snap rings (13) and (12). ix) Install No.
2 sun gear (11) and snap ring (10). 2) Install the following parts to the front plate. i) Press fit bearing (28) and install snap ring (29). ii) Install seal ring (30). D85EX-15 30-73 (2)