Komatsu — DISASSEMBLY

DISASSEMBLY AND ASSEMBLY HSS 13) Remove bushing (60) from hub (39). 14) Remove snap ring (58), and then remove stopper (56) from the hub. 3) Drive roll pin (65) into the shaft. 4) Pull out shaft (66) and remove gear (52), thrust washer (67), and bearing (69). a Pull roll pin (65) out of the shaft. Disassembly of carrier assembly 1) Turn over the hub and carrier assembly and remove bolts (89), and then remove carrier assembly (64) from hub (54). 5) Remove bushing (91) from carrier (90). 6. Sun gear 1) Remove snap ring (70) and collar (73). 2) Remove hub (92) from carrier assembly (64), then remove snap ring (50) and ring gear (52).

2) Using gear puller [8], remove sun gear (72) and bearing (98). 30-80 D85EX-15 (2)