DISASSEMBLY AND ASSEMBLY HSS 3) Using the bearing race puller, remove bear- ing (74). 4) Remove collar (71). 5) Remove snap ring (93). a Perform this work for only right side of the machine. ii) Secure the pinion with a press and remove nut (101) with tool E2 . iii) Using push tools [11], remove bevel pin- ion (102) from cage (103). iv) Remove bearing (104). v) Remove outer races (105) and (107) from cage (103). 7. Bevel pinion assembly 1) Remove the mounting bolts. 2) Using guide bolts [9] and forcing screws [10], remove bevel pinion assembly (95) and shim (96). a Check the quantity and thickness of the shims and store them. vi) Remove bearing (106) and spacer (108) from bevel pinion (102).
3) Disassembly of bevel pinion assembly i) Remove bolt (97), plate (99), and pin (100). D85EX-15 30-81 (2)