Komatsu — DISASSEMBLY

DISASSEMBLY AND ASSEMBLY HSS 8. Bevel gear shaft and bevel gear assembly 1) Sling bevel gear and shaft assembly (75) temporarily. 2) Remove cage assemblies (76) and (86). a Check the thickness, quantity, and posi- tions of shims (77). a Since both cages are different from each other, make marks on them. 5) Remove bearing (78) from bevel gear shaft (82). 6) Remove bolts (83). 7) Remove outer race (84) from cage (76). 8) Remove seal ring (85) from bevel gear shaft (81). 3) Move bevel gear and shaft assembly (75) to the left end and remove bearing (78) with puller [12]. a Remove only the bearing on the left side of the machine.

4) Sling bevel gear (79), remove mounting nut (80), and pull out bevel gear shaft assembly (81) to the right side of the machine. 30-82 D85EX-15 (2)