Komatsu — DISASSEMBLY

DISASSEMBLY AND ASSEMBLY PTO 5) Remove snap ring (31) from cover (30), and then remove bearing (32). 2) Remove the mounting bolts on the shaft side. Using forcing screws [3] and [4], remove shaft (14). 6) Remove snap ring (34) from PTO case (33), and then remove bearing (35). 3) Remove bearing (16) and spacer (17) from gear (15). a When reusing bearing, do not change its combination with the outer race. 4) Remove outer race (18) from gear (15). 3. Idle gear 1) Remove the mounting bolts and plate (13). 4. Cover Remove cover (20) on the opposite side of cover assembly (right). D85EX-15 30-95 (2)