DISASSEMBLY AND ASSEMBLY PTO 3) Install gear (22) to bearing (23). 4) Install snap ring (21). 5) Install gear (15). 6) Install bearing (16). a Press fit the inner race side to the shaft. 3. Idle gear 1) Install shaft (14). 3 Mounting bolt: 98 – 122.5 Nm {10 – 12.5 kgm} 2) Install bearing (16). 7) Install plate (13) and tighten the mounting bolts. 2 Mounting bolt: Adhesive (LT-2) 3 Mounting bolt: 98 – 122.5 Nm {10 – 12.5 kgm} 3) Install spacer (17). 4) Install outer race (18) to gear (15). 4. Cover assembly (left) 1) Install bearing (35) to case (33). 2) Install snap ring (34). D85EX-15 30-97 (2)