DISASSEMBLY AND ASSEMBLY POWER TRAIN AND LUBRICATING OIL PUMP REMOVAL AND INSTALLATION OF POWER TRAIN AND LUBRICATING OIL PUMP ASSEMBLY REMOVAL INSTALLATION k Disconnect the cable from the negative (–) ter- minal of the battery. Carry out installation in the reverse order to removal. 1. Remove the engine hood assembly. For details, see REMOVAL OF ENGINE HOOD ASSEMBLY. 2. Remove the operator's cab assembly. For details, see REMOVAL OF OPERATOR'S CAB ASSEMBLY. 3. Remove the floor frame assembly. For details, see REMOVAL OF FLOOR FRAME ASSEMBLY. 4. Remove tube clamp (1). 5. Disconnect the pump hose and tubes. (2): Power train pump discharge hose (3): Lubricating oil pump discharge tube (4):
Pump suction tube 6. Sling pump assembly (5) temporarily, remove the 2 mounting bolts, and then lift off pump assembly (5). 4 Pump assembly: 25 kg 30-108 D85EX-15 (2)