Komatsu — DISASSEMBLY

DISASSEMBLY AND ASSEMBLY FINAL DRIVE DISASSEMBLY AND ASSEMBLY OF FINAL DRIVE ASSEMBLY SPECIAL TOOLS 3. Shaft Using eyebolts, remove shaft (3). 4. Sprocket hub assembly 1) Remove the mounting bolts and plate (4). DISASSEMBLY 1. Draining oil Remove the drain plug and drain the oil from the final drive case. 6 Final drive case: Approx. 26 l 2. Wear guard and plate 1) Set the final drive assembly on a block with the sprocket side up. 2) Remove wear guard (1) and plate (2). 30-112 D85EX-15 (5) Symbol Part No.

Part name Necessity Q'ty New/Remodel Sketch J 2 790-431-1031 Block t 1 791-520-4140 Screw t 2 790-101-2360 Plate t 2 791-112-1180 Nut t 2 791-546-1110 Adapter t 2 790-201-2690 Plate t 1 790-101-2102 Puller t 1 790-101-1102 Hydraulic pump t 1 3 790-431-1031 Block t 1 791-520-4140 Screw t 1 791-112-1180 Nut t 2 01643-22460 Washer t 2 791T-627-2130 Plate t 1 N Q 791T-627-2120 Push tool t 1 N Q 790-101-2102 Puller t 1 790-101-1102 Hydraulic pump t 1 4 791-580-1510 Installer t 1 5 790-101-5201 Push tool kit t 1 790-101-5281 Plate t 1 790-101-5221 Grip t 1 01010-51225 Bolt t 1