DISASSEMBLY AND ASSEMBLY FINAL DRIVE 2) Using tool J2 , disconnect sprocket hub assembly (5) and bearing (6). 3) Using eyebolts (3), remove sprocket hub assembly (5). 5. Cover assembly 1) Remove floating seal (10). a Store the floating seal in a safe place so that it will not be damaged. 2) Remove mounting bolts (11). 4) Remove floating seal (7) and 2 bearing outer races (8). a Store the floating seal in a safe place so that it will not be damaged. 3) Using eyebolts, sling cover assembly (12) temporarily. Using 3 forcing screws [2], remove the cover assembly. 5) Turn over the sprocket hub assembly and remove sprocket (9). 4) Using puller [1], pull out bearing (15) and remove spacer (16).
D85EX-15 30-113 (2)