Komatsu — REMOVAL

DISASSEMBLY AND ASSEMBLY TRACK FRAME 8. Remove pin lock plate (6) and pull out pin (7). a If the equalizer bar hole and track frame hole are not aligned, the pin cannot be removed easily. Adjust the hanging height of the track frame properly. Right track frame assembly 1) Remove cover (10). [*3] k If the track frame assembly on the opposite side is floated before the pin is pulled out, support it on a block, etc. 2) Remove spacer (11). [*4] a Receive the oil flowing out of the pivot case with an oil pan, etc. 6 Pivot case: Approx. 8 l 3) Remove washer (12). a Remove seal (13) and washer (12) together. 9. Removal of track frame assembly Left track frame assembly 1) Remove cover (8). [*1] 10.

Lift off track frame assembly (13). 4 Track frame assembly: D85EX-15; 2,160 kg D85PX-15; 2,270 kg 2) Remove spacer (9). [*2] a Receive the oil flowing out of the pivot case with an oil pan, etc. 6 Pivot case: Approx. 8 l D85EX-15 30-125 (2)