Komatsu — REMOVAL AND INSTALLATION

DISASSEMBLY AND ASSEMBLY IDLER REMOVAL AND INSTALLATION OF IDLER ASSEMBLY REMOVAL k Disconnect the cable from the negative (–) ter- minal of the battery. 6. Remove spring (6) and seat (7). k Never stand in front of the idler assembly to prevent danger. 1. Remove the blade assembly. For details, see REMOVAL OF BLADE ASSEMBLY. 2. Expand the track shoe assembly. For details, see EXPANDING TRACK SHOE ASSEMBLY. 3. Loosen mounting bolts (2) of support (1) and spring seat clamping bolts and remove plate (3). 7. Remove yoke (8). 4. Pass wires through the hanging holes of idler assembly (4). Sling idler assembly (4) and slide it out forward along the top of the track frame. 8.

Lift off idler assembly (4). 4 Idler assembly: 290 kg 5. Remove guide plate (5). INSTALLATION Carry out installation in the reverse order to removal. a Install the idler assembly to the chassis with the oil filler plug on the left side of the chas- sis. D85EX-15 30-127 (2)